New drive

Posted on Thursday, August 18th, 2016 at 6:31 am

Well, the new 4TB drive has been erased and formatted, and all the 3D files have been copied over from the backup drive.  The 1.45TB transfer took 25 hours 14 minutes.   I am basically back to where I was before the SMC problem and the fry job on the 2TB.  Hopefully there won’t be any further problems.

.

I will be transferring the contents of the two 500G drives over to the 4TB and retiring the pair of USB 1.1 drives from the line up.  That will give me three USB 3.0 4TB drives and the 500G Firewire (+USB 1.1) system clone/catch all drive.  It will be a reduction of external drives from six to four.

.

Still no headway in finding the 2TB drive outside of the USB port reader in System Information (profiler).  Two options, get a USB 3.0 housing, if it doesn’t show up on the MacAir (when it arrives).  If neither of those work, the drive is dead.  $20 – 30 to verify would be worth it if the 2TB hard drive is still intact, and not too big a price if it’s a door stop.  It’s a 50/50 chance of it being the drive or the controller.  However, because the SMC was to blame, my suspicions lean toward the controller being fried.

.

Anyway, I will have old USB drives for whatever purpose.  But it feels good to be back to quo.  Now I can move the desk and get the new fi-op internet feed installed.  That was a delay that neither I nor my wallet needed.  The MacBook Pro is slipping further away.

.

On a lighter note, the Myka and the gecko story continues.

.

gecko

Both comments and pings are currently closed.

Comments are closed.